English
M 10 Years Warranty wind power generation 1.5mwh photovoltaic power generation energy storage systems
$116,700.00~
$671,500.00
M 10 Years Warranty wind power generation 1.5mwh photovoltaic power generation energy storage systems
$116,700.00~$671,500.00
per Piece
Capacity:
- 750KWh
- 500KWh
- 3MWh
- 1.5MWh
Product Details
Specification
M 10 Years Warranty wind power generation on grid off grid 1.5mwh photovoltaic power generation energy storage systems, we use EVE LF280K lifepo4 cell, Grade A, 6000+ cycles
MPC15-ONE | MPC30-ONE | |
DC Input Parameters | ||
Intial Battery Nominal Energy | 1.491MWH | 2.982MWH |
Battery Rack Quantity | 8 | 16 |
BMS Communication Interface | RS485/CAN | RS485/CAN |
DC Voltage Range | 420V-850V/1300V-1500V | 500V-850V/1300V-1500V |
AC Output Parameters | ||
Rated AC Power | 250KW | 500KW |
Max AC Power | 275KW | 550KW |
Rated AC Current | 361A | 722A |
Max AC Current | 397A | 794A |
DC Current Component | ＜0.5% | ＜0.5% |
Total Current Waveform Distortion Rate(THD) | ＜3%（Rated Power） | ＜3%（Rated Power） |
Grid Rated Voltage | 400V | 400V |
Grid Voltage Range | 320V-460V | 320V-460V |
Rated Frequency | 50/60Hz | 50/60Hz |
Grid Frequency Range | 45-55/55-65Hz | 45-55/55-65Hz |
Output Power Factor | 1 Lead -1 Lag | 1 Lead -1 Lag |
General Parameters | ||
IP Grade | IP54 | IP54 |
EPS Fire Fighting System | YES | YES |
Loading Capacity | Long Term 110% | Long Term 110% |
Operating Temperature Range | -30-+55℃ | -30-+55℃ |
Dimension (W X D X H) | 6058×2438×2896mm | 8058×2438×2896mm |
Weight | 23T | 40T |
PCS Communication Method | RS485,CAN,TCP/IP | RS485,CAN,TCP/IP |
PCS Communication Protocol | Modbus RTU,Modbustcp, IEC104 | Modbus RTU,Modbustcp, IEC104 |
Cooling Method of PCS | HAVC | HAVC |
Cooling Method of Battery Compartment | Liquid Cooling | Liquid Cooling |
Maximum Working Altitude | 5000m（＞3000m need to reduce power） | 5000m（＞3000m need to reduce power） |
Relative humidity (Non-condensing) | 0-95%（Non-condensing） | 0-95%（Non-condensing） |
500kwh/750kwh/1mwh/1.5mwh/2mwh/3mwh/5mwh are available！please contact us that do your demands energy storage container！can do OEM and ODM as you need！
● Modular design, power can be flexibly configured on demand
● Support on-grid and off-grid working modes, and meet the needs of different scenarios
● Using own-developed mature BMS, with multiple protection functions, advanced active equalization algorithm, automatic calibration algorithm, etc.
● BMS effectively increases the depth of use of the system and increases the discharge capacity of the system
● IP54 protection grade design, strong environmental applicability
● Complete life cycle monitoring and recording of the battery system
● Advanced temperature simulation technology to ensure the consistency of battery cell operating temperature and increase battery life
● The working status of the system can be viewed in real-time through the monitor platform webpage or mobile APP, and the fault warning information can get in advance
● The charging and discharging period can be set according to the needs, and the peak shaving and valley filling function can be completed, saving electricity bills
Drawing
Single unit size under 2MWh:
Single unit size under 4MWh above 2MWh:
Product Show
Application
Production Process
About US
Packing
FAQ
1. Are you a Manufacturer or a trading company?
Jevier is a manufacturer, welcome to visit our factory any time.
2. What is your quality control process?
Our factory have ISO90001 certification, from incoming materials to production, and then to delivery, there are corresponding QC control. Battery cells we use EVE Grade A, the quality of this product is absolutely guaranteed.
3. What is your warranty?
Battery pack warranty 10 years, the container energy storage System warranty also 10 years.
4. What's the lead time for mass production?
It depends on the actual situation. 3.2V280Ah LFP cell in stock anytime, 12.8V280Ah LFP battery pack need about 7-10days, All-in-one power wall in stock anytime, Container energy storage system about 40days.
5.Do you accept ODM/OEM orders?
Yes, we can accept OEM/ODM, customer's logo can be acceptable.
6.How can I be your distributor or service partner?
Please directly email to sales@jevier.com, we can discuss about this. We need to know your target market, what application you want to cover, and estimated annual purchase volume.
Jevier is a manufacturer, welcome to visit our factory any time.
2. What is your quality control process?
Our factory have ISO90001 certification, from incoming materials to production, and then to delivery, there are corresponding QC control. Battery cells we use EVE Grade A, the quality of this product is absolutely guaranteed.
3. What is your warranty?
Battery pack warranty 10 years, the container energy storage System warranty also 10 years.
4. What's the lead time for mass production?
It depends on the actual situation. 3.2V280Ah LFP cell in stock anytime, 12.8V280Ah LFP battery pack need about 7-10days, All-in-one power wall in stock anytime, Container energy storage system about 40days.
5.Do you accept ODM/OEM orders?
Yes, we can accept OEM/ODM, customer's logo can be acceptable.
6.How can I be your distributor or service partner?
Please directly email to sales@jevier.com, we can discuss about this. We need to know your target market, what application you want to cover, and estimated annual purchase volume.